6-pin power cable used in Kaamos Tech DACs and ADCs.
Use with Kaamos Tech power supplies (coming later) as is or cut the cable and solder to your own power supplies.
This is a standard Molex Micro-Fit 3.0 cable.
Note that the 6P cable is quite stiff and doesn’t bend sharply near the connectors so with 150mm cable the boards need to be very close to one another.
If doing any mods or your own boards, please note that the pinout is mirrored. Therefore, power supply end and target end need to have mirrored footprints. This is irrelevant if using existing Kaamos Tech boards.