-
Crystek CCHD-957 oscillator
£32.00 Ex. VATHigh performance Crystek CCHD-957 oscillator. See datasheet on Crystek website.
24.576 MHz (512x 48k) is to be used with 48 kHz family of sample rates (48 kHz, 96 kHz, 192 kHz etc).
22.5792 MHz (512x 44.1k) is to be used with 44.1 kHz family of sample rates (44.1 kHz, 88.2 kHz, 176.4 kHz etc).
Sold to be used on SPDIF TX board. If purchased with the board, we will solder down the oscillator for you.
-
Power Cable 2-Pin
£2.70 Ex. VAT2-pin power cable used in Kaamos Tech digital-only boards.
Use with Kaamos Tech power supplies (coming later) as is or cut the cable and solder to your own power supplies.
This is a standard Molex Micro-Fit 3.0 cable.
-
Power Cable 6-Pin
£4.70 Ex. VAT6-pin power cable used in Kaamos Tech DACs and ADCs.
Use with Kaamos Tech power supplies (coming later) as is or cut the cable and solder to your own power supplies.
This is a standard Molex Micro-Fit 3.0 cable.
Note that the 6P cable is quite stiff and doesn’t bend sharply near the connectors so with 150mm cable the boards need to be very close to one another.
If doing any mods or your own boards, please note that the pinout is mirrored. Therefore, power supply end and target end need to have mirrored footprints. This is irrelevant if using existing Kaamos Tech boards.
-
U.FL Cable
£2.40 – £2.70 Ex. VATU.FL to U.FL cable used for clocks and digital audio between Kaamos Tech boards.
This is a 1.37 mm 6 GHz 50 ohm coaxial cable with U.FL female connector at each end.
Note that this item is a single cable and you often need 4 cables between boards (MCLK, BCLK, WCLK, DATA).
-
U.FL to Pinheader Adapter
£5.30 – £6.90 Ex. VATConnect Kaamos Tech boards easily to boards with pinheaders using this U.FL to pinheader adapter.
The item is one adapter only – select a female or male header.
Sold complete with all connectors soldered.